1. Automatic program operation refers to the use of automatic program operation during processing, which is a commonly used processing method. In this state, the operator only needs to clamp the product and press the program start button to start the operation

The third one is MDI mode, mainly used for manually entering short codes such as S600M3
The 4DNC mode is mainly used for wire processing

1 Program zeroing button, used for zeroing operation
2. Rapid feed mode, press this key in conjunction with the corresponding axis to move quickly
3. Slow feed, press this button to move the machine tool slowly accordingly
4 handwheel buttons, press this button to operate the handwheel

1. Single section execution, pressing this key will stop the program after executing for a period of time

3 options to stop. When there is M01 in the program, pressing this key will activate the code
4 Manual demonstration instructions

1 Program restart button

3 idle operation, usually combined with the machine tool lock command, used for debugging programs.

This represents the corresponding spindle, and generally machine tools do not have 5-axis and 6-axis. Can be ignored